The FT14HC is ball float steam trap having stainless steel working internals and integral automatic air venting facility. Trap is installed horizontally, threaded connections
Available typesFT14HC
High capacity - As standard the FT14HC is available with flow direction in either left-to-right or right-to-left direction.
Please state preference when placing an order.
Note: These ball float steam traps are available with either 4.5, 10 or 14 bar internals (PMX).
Sizes and pipe connections
DN15-DN25,screwed BSP or NPT.
Limiting Condition |
Body design conditions |
PN25 |
PMA Maximum allowable pressure |
25 bar g |
TMA Maximum allowable temperature |
300°C |
Minimum allowable temperature |
0°C |
PMO Maximum operating pressure for saturated steam service |
21 bar g |
TMO Maximum operating temperature |
242°C |
Minimum operating temperature |
0°C |
PMX Maximum differential pressure |
FT14HC-4.5 |
4.5 bar |
FT14HC-10 |
10 bar |
FT14HC-14 |
14 bar |
Designed for a maximum cold hydraulic test pressure of 38 bar g |
Material: Body:A216 WCB
Bonnet:216 WCB
Seat:Stainless Steel
Ball Float and Lever:Stainless Steel
Additional cold water capacities from the thermostatic air vent under start-up conditions
Capacities shown above are based on condensate at saturation temperature. Under start-up conditions when the condensate is cold the internal thermostatic air vent will be open and provides additional capacity to the main valve.